fluorescent magnetic particle flaw detector strong stability CDX-II Demagnetization magnetic particle flaw detector
product overview

◆ Mainly used for ferromagnetic material surface and near surface flaw detection, AC electromagnetic mode.

◆ One machine can be compatible withA,D,E,Ofour kinds, to meet the needs of customers with various types of workpieces.

◆ Output current adjustable, can adapt to different sensitivity requirements, AC magnetization with power phase control, overload protection.

◆ Adopt magnetic field magnetization method, small size, light weight, easy to carry.

◆ New materials, new technology, fast detection speed, high sensitivity, low failure rate, and automatic attenuation demagnetization function.
 Products are widely used in aerospace, railway, machinery, automobile, oil field, boiler, bearing, gear, motorcycle, internal combustion engine, diesel engine, spring, standard parts, shipbuilding and other industries in the field of nondestructive testing. nbsp;

4. If there is any quality problem with the equipment itself within the warranty period, the buyer shall immediately notify the supplier, and the supplier shall arrive at the buyer within 36 hours for free repair.

 Portable magnetic particle flaw detector model, product, function series
CDX-I  AC/36V,DC/10V AC/DC magnetization, optional A, D, O three types
CDX-II  AC/36V*2,DC/10V AC/DC magnetization, optional A, D, E, O four types
CDX-III  AC/36V*2, AC magnetization, optional A, D, E, O four types
CDX-IV  AC/36V,DC/10V AC/DC magnetization, optional A, D, O three types
CDX-V  AC/36V*2, AC magnetization, optional A, D, E, O four types, with current regulation and demagnetization function
CEX-A  AC/36V,DC/10V AC/DC magnetization, optional A, D, O three types
CJE-1  AC/36V, AC magnetization, optional A, D, O three types
CJX-A  AC/36V, AC magnetization, optional A, D, O three types
CJE-2  AC/36V, AC magnetization, optional A, D, O three types
CJE-2A  AC/36V, AC magnetization, optional A, D, O three types
CXX-3B  AC/36V*2, AC magnetization, optional A, D, E, O four types
CJE-12/220  AC/220V,DC/12V AC/DC magnetization, can be plugged into 220V city power supply, can also use 12V battery power supply, suitable for field operation
CEE-3508  AC/220V,DC/12V AC/DC magnetization, can be plugged into 220V city mains, can also use 12V battery power supply, suitable for field operation
CJE-220 AC/220V plug city mains

XII. Working principle of the circuit This machine adopts programmable logic controller (PLC) to control the whole machine action, each action sequence and magnetization times and time, according to the detection process requirements of different workpieces to prepare PLC working program, so that the whole flaw detection equipment to achieve the use of efficiency and use effect
 Portable magnetic particle flaw detector
Type A is also called horseshoe yoke or fillet weld, movable joint inclined head, equipped with working lamp; especially suitable for flaw detection of workpieces with abnormal surface and complex shape. Polar distance:20-160; Lifting force:AC≥4.5,DC≥18; Weight:2.0. Using this made a device called horseshoe yoke flaw detector or fillet weld flaw detector, using a wide range of live joints.
D type also known as electromagnetic yoke, a variety of active joints, magnetization. Polar distance: 60-220, lifting force: AC≥5, DC≥18; weight: 2.5. Independent use of this made of equipment called electromagnetic yoke flaw detector, with high magnetic conductivity, magnetization and other characteristics.
E type  is also called cross yoke or rotating magnetic field, which can be used for one-time composite magnetization inspection. Walking roller and working lamp can improve the inspection speed. Polar distance:110, lifting force:AC≥12, weight:3.0. independent use of this equipment made of rotary magnetic field flaw detector, it use two crossed yoke using alternating current phase shift technology, so that it produces a composite rotating magnetic field with time change, a composite magnetization of the workpiece. Fast detection speed and high detection quality.
Type O(inner diameter 150mm)  is also called ring, inner diameter:150 mm, central magnetic field ≥180Oe. Weight:2.5. Independent use of this made of a device called ring flaw detector, it is the use of the coil when energized to produce a strong magnetic field principle design, suitable for shaft rod, pipe, blade and other complex workpiece segmented flaw detection or demagnetization.
fluorescent magnetic particle flaw detector strong stability CDX-II All functions and safety measures of demagnetization magnetic particle flaw detector shall meet the requirements of overhaul operation in depot CJE-2 AC/36V, AC magnetization, and A, D and O types can be selected.

 Model and function parameters of mobile magnetic particle flaw detector
CJD-1000  Magnetization current: AC 0-1000A, equipped with barbed rod and cable, can be used for circumferential magnetization of contact method and longitudinal magnetization around cable method, particle size: 80-400 mesh
CJD-2000  Magnetization current: AC 0-2000A, with thorn rod and cable, can be used for contact method circumferential magnetization and cable winding method longitudinal magnetization, magnetic particle size: 80-400 mesh
CJD-3000  Magnetization current: AC 0-3000A, with thorn rod and cable, can be used for contact method circumferential magnetization and cable winding method longitudinal magnetization, magnetic particle size: 80-400 mesh
CJD-4000  Magnetization current: AC 0-4000A, with thorn rod and cable, can be used for circumferential magnetization of contact method and longitudinal magnetization around cable method, particle size: 80-400 mesh
CJD-5000  Magnetization current: AC 0-5000A, with thorn rod and cable, can be used for contact method circumferential magnetization and cable winding method longitudinal magnetization, magnetic particle size: 80-400 mesh
CJD-6000  Magnetization current: AC 0-6000A, with thorn rod and cable, can be used for contact method circumferential magnetization and cable winding method longitudinal magnetization, magnetic particle size: 80-400 mesh
CY-1000  Magnetization current: AC 0-1000A, with stab bar and cable, can be used for circumferential magnetization of contact method and longitudinal magnetization around cable method
CY-2000  Magnetization current: AC 0-2000A, equipped with stab bar and cable, can be used for circumferential magnetization of contact method and longitudinal magnetization around cable method
CY-3000  Magnetization current: AC 0-3000A, with stab bar and cable, can be used for circumferential magnetization of contact method and longitudinal magnetization around cable method
CY-4000  Magnetization current: AC 0-4000A, with stab bar and cable, can be used for circumferential magnetization of contact method and longitudinal magnetization around cable method
CY-5000  Magnetization current: AC 0-5000A, with stab bar and cable, can be used for circumferential magnetization of contact method and longitudinal magnetization around cable method
CYD-6000  Magnetization current: AC 0-6000A, with barbed rod and cable, can be used for circumferential magnetization of contact method and longitudinal magnetization of cable method
CED-1000  Magnetization current: AC 0-1000A, DC 0-499A(half wave), with thorn rod and cable, can be used for contact method circumferential magnetization and cable winding method longitudinal magnetization, magnetic particle size: 80-400 mesh
CED-2000  Magnetization current: AC 0-2000A, DC 0-998A(half wave), equipped with barbed rod and cable, can be used for circumferential magnetization of contact method and longitudinal magnetization of cable method, particle size: 80-400 mesh
CED-3000  Magnetization current: AC 0-3000A, DC 0-1497A(half wave), with thorn rod and cable, can be used for contact method circumferential magnetization and cable winding method longitudinal magnetization, magnetic particle size: 80-400 mesh
CED-4000  Magnetization current: AC 0-4000A, DC 0-1996A(half wave), equipped with barbed rod and cable, can be used for circumferential magnetization of contact method and longitudinal magnetization of cable method, particle size: 80-400 mesh
CED0  Magnetization current: AC 0-5000A, DC 0-2495A(half wave), equipped with barbed rod and cable, can be used for circumferential magnetization of contact method and longitudinal magnetization of cable method, particle size: 80-400 mesh
CED-6000  Magnetization current: AC 0-6000A, DC 0-2994A(half wave), equipped with barbed rod and cable, can be used for circumferential magnetization of contact method and longitudinal magnetization of cable method, particle size: 80-400 mesh
 Large fixed magnetic particle flaw detector series
CJW-1000  horizontal magnetic particle flaw detector
CJW-2000  horizontal magnetic particle flaw detector
CJW-2000  horizontal magnetic particle flaw detector
CJW-3000  imported PLC control, horizontal semi-automatic magnetic particle flaw detector
CJW-4000  imported PLC control, horizontal semi-automatic magnetic particle flaw detector
CJW-6000  imported PLC control, horizontal semi-automatic magnetic particle flaw detector
CJW-9000  imported PLC control, horizontal semi-automatic magnetic particle flaw detector
CJW-10000  imported PLC control, horizontal semi-automatic magnetic particle flaw detector
CJW-12000  imported PLC control, horizontal semi-automatic magnetic particle flaw detector
CDG-1000  imported PLC control, multifunctional horizontal semi-automatic fluorescent magnetic particle flaw detector
CDG-2000  imported PLC control, multifunctional horizontal semi-automatic fluorescent magnetic particle flaw detector
CDG-2000  simple, horizontal fluorescent magnetic particle flaw detector
CDG-3000  imported PLC control, multifunctional horizontal semi-automatic fluorescent magnetic particle flaw detector
CDG-4000  imported PLC control, multifunctional horizontal semi-automatic fluorescent magnetic particle flaw detector
CDG-6000  imported PLC control, multifunctional horizontal semi-automatic fluorescent magnetic particle flaw detector
CDG-9000  imported PLC control, multifunctional horizontal semi-automatic fluorescent magnetic particle flaw detector
CDG-10000  imported PLC control, multifunctional horizontal semi-automatic fluorescent magnetic particle flaw detector
CDG-12000  imported PLC control, multifunctional horizontal semi-automatic fluorescent magnetic particle flaw detector
CEW-1000  imported PLC control, horizontal semi-automatic AC/DC magnetic particle flaw detector
CEW-2000  imported PLC control, horizontal semi-automatic AC/DC magnetic particle flaw detector
CEW-3000  imported PLC control, horizontal semi-automatic AC/DC magnetic particle flaw detector
CEW-4000  imported PLC controlled, horizontal semi-automatic AC/DC magnetic particle flaw detector
CEW-6000  imported PLC control, horizontal semi-automatic AC/DC magnetic particle flaw detector
 
CZQ-4000  three-phase full-wave low-frequency magnetic particle flaw detector, imported PLC control, current preset function
CZQ-6000  three-phase full-wave low-frequency magnetic particle flaw detector, imported PLC control, current preset function
CZQ-10000  three-phase full-wave low-frequency magnetic particle flaw detector, imported PLC control, current preset function
CZQ-12000  three-phase full-wave low-frequency magnetic particle flaw detector, imported PLC control, current preset function
CZQ-15000  three-phase full-wave low-frequency magnetic particle flaw detector, imported PLC control, current preset function
SC100- 8K Handheld Fluorescent Flaw Detector, SC-3W Portable Fluorescent Lamp
fluorescent magnetic particle flaw detector strong stability CDX-II Demagnetization magnetic particle flaw detector 5. Installation 5.1 Installation and use conditions 5, 1, 1 Surrounding medium temperature is not lower than-5 C ° is not higher than 40C°CJD-2000 Magnetization current: AC 0-2000A, with thorn rod and cable, can be used for contact method circumferential magnetization and cable method longitudinal magnetization, magnetic particle size: 80-400 mesh